Filter
Top Products
Page 8
DV40 STEP PEDESTAL INSTALLATION INSTRUCTIONS
1. Remove log box located between stove and pallet
2. Remove door from unit.
3. Remove pallet mounting bolts from underneath pallet and remove stove from pallet
4.
WITH FRONT DOOR REMOVED lay unit down on it’s front for easy access to bottom.(Fig. 1)
NOTE: The right and left logs are fastened to the stove. Take special care while laying the
stove down to not jar and fracture the logs.
Fig. 2
Fig. 1
Pedestal
assembly
Pedestal adapter
5. Slide pedestal assembly on to unit. Line up unit with holes in pedestal adapter and secure with 1/4-
20 bolts supplied.
6. Carefully stand stove up and place in desired location.
7. Tip unit back and slide oak strips onto front of pedestal as shown. (Fig. 2)
8. Repeat step for rear of pedestal.
9. Check to insure upper baffle and log set are in their proper locations.
10. Replace door on stove.