Filter
Top Products
EN-9
SIDE AV• : Headphone jack, Composite
video and audio, and S-Video input.
CVI 1• : Component video (Y Pb Pr) with
Component audio input.
CVI 2• : Component video (Y Pb Pr) with
Component audio input.
VGA• : Video Graphics Array with audio
input.
HDMI 1• : High Definition Multimedia
Interface input.
HDMI 2• : High Definition Multimedia
Interface input.
Side HDMI: • High Definition Multimedia
Interface input.
Refer to Quick Start Guide for connection
instructions.
Wall-mount the TV2.7
WARNING: B
Wall mounting the TV should only be
performed by qualifi ed installers. Konin-
klijke Philips Electronics N.V. bears no
responsibility for improper mounting
that results in accident or injury.
Use VESA-compatible bracket
Purchase a VESA-compatible wall bracket1.
Depending on the size of your TV screen,
purchase one of the following wall
brackets:
Remove the TV stand.2.
Note: D
These instructions are only applicable
to TV models with mounted stands. If
your TV stand is not mounted, see Secure
the VESA-compatible wall bracket to the
TV on this page . Carefully place the TV
face down on a flat, stable surface that is
covered by soft cloth. The cloth should be
thick enough to protect your screen.
Using a cross-head screwdriver (not 3.
supplied), unscrew the four screws that
secure the stand to the TV.
Firmly pull the stand from the bottom 4.
of the TV. Place both the stand and
screws in a secure location for future
reinstallation.
Secure the VESA-compatible wall
bracket to the TV
Connect the antenna cable, mains cord and
all other devices to the back of the TV as
described in the Quick Start Guide.
Locate the four mounting nuts at the 1.
back of the TV.