Filter
Top Products
EN-8
If necessary, refer to the Quick Start Guide for
stand mounting instructions.
Position the TV2.4
Consider the following before positioning
your TV:
The ideal viewing distance for watching •
TV is three times its screen size.
Position the TV where light does not fall •
directly on the screen.
Connect your devices before you •
position your TV.
Your TV is equipped with a Kensington •
Security Slot at the back of the TV.
If connecting an anti-theft Kensington
lock (not supplied), position the TV
within reach of a permanent object (such
as a table) that can be easily attached to
the lock.
For the best Ambilight effect, position the •
TV 10cm (four inches) to 20cm (eight
inches) away from the wall. Ambilight also
works best in a room with dim lighting.
Install the remote control 2.5
batteries
Slide the battery cover off the back of 1.
the remote control.
Insert the two supplied batteries. Be sure 2.
the + and - ends of the batteries line up
with the markings inside the case.
Slide the cover back into position.3.
Note: D Remove the batteries if not using
the remote control for an extended
period of time.
Use the Source List2.6
The source list lets you select the audio and
video source that your device is connected
to.
Press 1. SOURCE to display the audio and
video source list.
Press 2. ï or Î to highlight your AV
source and press OK to select.
Source List
Source
List
TV
HDMI 1
HDMI 2
AV
SIDE AV
CVI 2
CVI 1
VGA
Source List:
TV• : Normal TV broadcast via the
75-ohm antenna connector.
AV• : Composite video and audio output.