Filter
Top Products
8 C1621M-E (9/08)
Before You Begin
Endura is a network system that requires a continuous amount of bandwidth to transmit true, live video. Therefore, always include your network
administrator when planning and installing Endura components.
You will also need the following items:
• Pelco-approved Endura certification
• Access to an Endura network
– that is an active, Gigabit Ethernet network that supports the full Internet Protocol suite,
– that is configured with at least one Endura system manager, and
– that is configured with at least one Endura workstation.
NOTES:
• Endura components are designed to deliver high-quality, high-frame rate video across a network. For best results, make sure your
installation meets the power, environmental, and networking guidelines described in the Endura Installation Guidelines and Best Practices
document (C2670M).
• When using one or more network switches on the Endura network, enable autonegotiation on all switches.
• These network requirements represent the minimum standard for a small Endura-capable security network. Please consult the Endura
Network Design Guide (C1640M) to make sure your network is properly configured. Your system may be different and may require
additional hardware, software, and network resources.
PARTS LIST
Qty Description
1 NVR5100 Series network video recorder
1 Hard drive pack:
Six-drive (1.5 TB/3.0 TB) models:
6 Filled hard drive carriers, numbered Drive 1 through Drive 6
6 Empty hard drive carriers, numbered Drive 7 through Drive 12
Twelve-drive (6.0 TB/9.0 TB) models:
12 Filled hard drive carriers, numbered Drive 1 through Drive 12
1 Accessory pack:
5 Rubber feet with 8-32 x 0.375-inch, Phillips pan head screws (for desktop mounting, installed)
6 Power cords (2 USA standard, 2 European standard, and 2 UK standard)
2Front bezel keys
1 Disposable wrist strap for electrostatic discharge (ESD) protection
1 Rack mount kit (included with accessory pack):
2 Chassis mounting brackets with handles and thumbscrews (installed)
12 Screws, 10-32 x 0.25-inch, Phillips pan head (six for each bracket, installed)
2 Adjustable support rail sets (each set includes one front-mounting rail and one rear-mounting rail)
8 Screws, 8-32 x 0.375-inch, Phillips truss head (four for each support rail)
8 Screws, 10-32 x 0.5-inch, Phillips flat head (two for each front rail, two for each rack rail spacer)
4 Screws, 10-32 x 0.75-inch, Phillips pan head (two for each rear rail)
2 Rack rail spacers
14 Cage nuts, 10-32
3 Product serial number labels (attached to unit)
1 NVR5100 Series Installation manual
1 Safety instructions
3 Hard drive inserts