Filter
Top Products
H.264(1)/H.264(2)
[H.264 transmission]
Select “On” or “Off” to determine whether or not to transmit H.264 images.
• On: Transmits H.264 images.
• Off: Does not transmit H.264 images.
• Default: On
Note
• When “On” is selected for “H.264 transmission” in “H.264(1)” or “H.264(2)”, displaying of H.264 images
or JPEG images on the “Live” page will become available.
• When “On” is selected for “H.264 transmission” in “H.264(1)” and “H.264(2)”, H.264 images are
viewable using other devices with each setting.
• When “On” is selected for “H.264 transmission” in “H.264(1)” or “H.264(2)”, the transmission interval
of JPEG images may sometimes become longer.
[Internet mode (over HTTP)]
Select “On” when transmitting H.264 images via the Internet. It is possible to transmit H.264 images without
changing the broadband router settings configured for JPEG image transmission.
• On: H.264 images and audio will be transmitted using the HTTP port. Refer to page 107 for further
information about the HTTP port number settings.
• Off: H.264 images and audio will be transmitted using the UDP port.
• Default: On
Note
• When “On” is selected, only “Unicast port (AUTO)” will be available for “Transmission type”.
• When “On” is selected, it may take time to start displaying H.264 images.
• When “On” is selected, H.264 images may not be displayed depending on the number of the concurrent
access user and audio data availability, etc.
• When “On” is selected, only IPv4 access is available.
[Image capture size]
Select the image capture size from the following.
When “4:3” is selected for “Aspect ratio”
VT164W
VT164W
VT164
VT164
VP104W
VP104W
VP104
VP104
:
– H.264(1): QVGA/ VGA/ 800x600
– H.264(2): QVGA/ VGA
VP101
VP101
:
QVGA/ VGA
When “16:9” is selected for “Aspect ratio”
VT164W
VT164W
VT164
VT164
VP104W
VP104W
VP104
VP104
:
– H.264(1): 320x180/ 640x360/ 1280x720
– H.264(2): 320x180/ 640x360
VP101
VP101
:
320x180/ 640x360
• Default:
VT164W
VT164W
VT164
VT164
VP104W
VP104W
VP104
VP104
:
– H.264(1): 640x360
– H.264(2): 320x180
VP101
VP101
:
– H.264(1): VGA
– H.264(2): QVGA
Operating Instructions 51
9 Configure the settings relating to images and audio [Image/Audio] (BL-VT164W/BL-VT164)/ Configure the settings
relating to images [Image] (BL-VP104W/BL-VP104/BL-VP101)