Filter
Top Products
DATA-LINC GROUP
32
PN 161-09981-002C
rev 8/04
DDAA1000/SRM User Guide
(9) Lowpower Mode
For DDAA1000/DD1000 use the user should not change this parameter. Do not enable the low power mode.
(A) High Noise
Use the menu to indicate if the modem will be operated in an environment with a high degree of radio noise and
interference.
With a setting of 1, the rejection of interference is improved, at the cost of reduced range and/or throughput.
(B) MCU speed
Use this menu to set the speed of the MCU (processor) in the modem.
Note: Only needed when the DDAA1000/SRM is set to 115.2K baud . But the DDAA1000/SRM is limited to
19.2K baud
gnitteS noitpircseD setoN
0deepswoLnoitpmusnoctnerrucsecudeR
1deepshgiHduabK032rofderiuqeR