Filter
Top Products
Section
8
Operating the Oasis™ Heating
Module
This section describes the features, operation and maintenance
of your new Oasis™ Heating Module. READ THESE
INSTRUCTIONS AND SAVE FOR REFERENCE.
8.1 Features of Your Oasis™ Heating
Module
The Oasis™ Heating Module uses a diesel burner (12 VDC)
controlled by a multi-functional electronic controller as the
primary source of heating coolant fluid (anti-freeze and water).
Two 1500 Watt, 120 VAC immersion elements are used as
secondary heat sources. The Oasis™ Heating Module heats the
coolant fluid to provide a source of heat for all hydronic space
heating needs. When used with the Distribution Module and its
integral distribution pumps, the Oasis™ Heating Module has the
ability to circulate the coolant fluid to all space heating areas. It
can also provide a supply of domestic hot water using the
integral heat exchanger in the Distribution Module.
Other features of the Heating Module include:
• A high-temperature, stainless steel burner and stainless steel
jacket.
• 8.2 US gallon welded insulated stainless steel coolant tank
that minimizes heat loss and optimizes heat recovery.
• Low coolant level switch on the tank.
• Easy to install, completely modular and field serviceable with
Heating Module hookups and connections easily accessible
from the front and top of the Oasis™ Heating Module.
• Quiet operation and low power consumption.
International Thermal Research 8-1