Filter
Top Products
Section 2, Mounting the Oasis™ Heating Module
Make sure you are familiar with Section 1 – Overview of this
Manual. If the system is not installed according to specifications
and with the correct equipment, your Oasis™ Heating Module may
not operate properly, safety may be compromised, and your
Warranty may be voided.
!
W
ARNING
2.2 Identifying Your Oasis™ Heating
Module Model
As the owner, you must be fully aware of the controls and
operating features particular to your model of the Oasis™ Heating
Module. This is essential for the proper functioning and life of your
Oasis™ Heating Module as well as protecting your warranty. Your
model can be identified by locating the serial number label on the
outside case of the Oasis™ Heating Module. The serial number
identifies the model type through the first series of letters and
numbers.
The types of Oasis™ Heating Module models are:
CH50 – Oasis™ Heating Module
CH35 (“CSA Certification Pending”) – Oasis™ Heating
Module
2.3 Your Mounting Location
Your mounting location should consider the following:
• Mounting location must be able to support double the gross
weight of the Oasis™ Heating Module (i.e. 160 lbs. x 2 =
320lbs./73 KG x 2 = 146 KG) and must be of a non-
combustible and non absorptive surface.
• Oasis™ Heating Module is 14”H x 14”W x 30” D. (35.6 cm x
35.6 cm x 76.1 cm), see Figure 2-1: Module Dimensions.
• Oasis™ Heating Module must be installed in a compartment
which is completely isolated from the atmosphere of living
spaces.
2-2 The Oasis™ Heating Module