16
continue to chime when system is armed.
CHANGE KEYPAD BEEP VOLUME - When the Touchpad buttons are pressed or
when an entry warning activates, the Touchpad beeper sounds. This function allows
the Touchpad beeper volume to be adjusted. Press YES to increase, press NO to
decrease. Selections are HIGH, MED-HIGH, MED, LOW and OFF.
CHANGE VOICE VOLUME - All Touchpad functions are displayed in the LCD window
and are accompanied by a voice prompt. This function allows the Touchpad voice
prompt volume to be adjusted. Press YES to increase, press NO to decrease. Se-
lections are HIGH, MED-HIGH, MED, LOW and OFF.
ACTIVATE SIREN TEST - Activates the alarm (while disarmed) for about 2 seconds
and performs a battery test. If the alarm does not sound, call for service. Note: If
the battery is low, a “LOW BATTERY E02-00 SERVICE” will appear in the display
indicating a low battery condition. First allow 24 hours for the battery to recharge. If
the trouble continues, call for service.
DISPLAY FIRE ALARM - Displays alarms that have occurred on the Fire Zone(s).
Press the YES and NO buttons to scroll zones. Note: This selection only appears
with a Master I-FOB inserted in the Touchpad.
DISPLAY FIRE TROUBLE - Displays trouble conditions that have been detected on the
Fire Zone(s). Press the YES and NO buttons to scroll zones. Note: This selection
only appears with a Master I-FOB inserted in the Touchpad.
TOUCHPAD MENU MODE
ACTIVATE
SIREN TEST Y/N
DISPLAY
FIRE ALARM Y/N
DISPLAY
FIRE TROUBLE Y/N
CHANGE KEYPAD
BEEP VOLUME Y/N
CHANGE VOICE
VOLUME Y/N
F-64TPBR_OI319A.03_USER_...
page 16
Friday, September 15, 2006 10:39
Composite