9
BYPASSING FAULTED ZONES
If you are trying to arm with a faulted zone or zones, the LCD display will clearly indicate which zone(s) are faulted. If you
cannot repair the zone(s), they may be temporarily removed from the system, or bypassed, using the following procedure:
1
Press the BYPASS button. The LCD window will
read "DISPLAY ZN DIRECTORY Y/N".
2
Press YES. The Zone Directory will display, starting with zone 1. Press YES to scroll up and press
NO to scroll down through the list of zones. When the zone you wish to bypass appears on the LCD win-
dow, press BYPASS and the Bypass icon will appear for each bypassed zone listed.
3
With the selected perimeter zone now bypassed, you can now proceed with either arming Stay or
Night, as desired. Press RESET, allowing the LCD window to read "SYSTEM READY". Then press
STAY or NIGHT.
WARNING: When bypassing a monitored door, be aware that the bypassed door is temporarily removed from the system
and will not send a disarm signal to the Touchpad when unlocked, and false alarms may result. Therefore, an I-FOB MUST
be used to disarm when entering through a bypassed monitored door.
BYPASS
"Display Zone Directory?"
Press YES to select or
MENU to skip"
YES
F-64TPBR_OI319A.03_USER_...
page 9
Friday, September 15, 2006 10:39
Composite