Napco Security Technologies F-64TPBR Home Security System User Manual


 
12
If an alarm occurs while you are at home:
The Touchpad siren will sound and the red ARMED light will flash. The LCD display will read
"ALARM". Proceed with caution! If you suspect that an intruder may still be in the premises, leave
immediately and call authorities from a neighbor's telephone.
To silence the alarm, insert your I-FOB key into the I-FOB slot on the face of the Touchpad and re-
move when alarm has silenced.
The LCD window will continue to display the names of the zone(s) on which the alarm occurred. De-
termine which zone caused the alarm and then press DISARM
/ RESET to clear the alarm memory.
If an alarm occurs while you are away:
When you unlock the deadbolt to enter, the Touchpad sounder will activate and the red ARMED light
will be flashing to warn you that an alarm had occurred while you were away.
Proceed with caution! If you suspect that an intruder may still be on the premises, leave
immediately and call authorities from a neighbor's phone.
To disarm the system, you must insert your I-FOB key into the I-FOB slot on the Touchpad. If the
system is not disarmed in 30 seconds, the alarm will sound.
The LCD window will continue to display the names of the zone(s) on which the alarm occurred. De-
termine which zone caused the alarm and then press DISARM
/ RESET to clear the alarm memory.
SILENCING AN ALARM
ARMED
ALARM
F-64TPBR_OI319A.03_USER_...
page 12
Friday, September 15, 2006 10:39
Composite