Napco Security Technologies F-64TPBR Home Security System User Manual


 
11
DISARMING THE SYSTEM
Disarming when home (when Armed Night or Stay):
To disarm the system. press the DISARM / RESET button on the F-64TPBR Touchpad.
This function is available only when armed in the Night mode or Stay mode.
NOTE: If the system is armed in the Away mode (interior fully protected), pressing the DISARM / RE-
SET button will not only fail to disarm the system, but pressing ANY button when armed Away will
instantly generate an alarm.
The system may also be disarmed at any time with the I-FOB.
To disarm the system, insert your I-FOB key into the I-FOB slot on the F-64TP Touchpad or F-64TPBR
Touchpad and remove when the system is disarmed.
F-64TPBR_OI319A.03_USER_...
page 11
Friday, September 15, 2006 10:39
Composite