Filter
Top Products
6
3 Performing Operations
Text below explains how to connect to the GB-24A and how to perform various settings.
Note: If the GB-24A is restarted due to a power interruption etc., wait until the screen on the GB-24A main unit displays the normal
operation screen (it takes several minutes before the normal operation screen is displayed) before using a web browser to
access the GB-24A. If access is attempted while the GB-24A is still starting up, the most recent data might not be displayed
or communication errors could occur.
Note: Default IP address of GB-24A is "192.168.1.1". (Factory setting)
3-1 Entering the User Name and the Password, and Connecting to
the GB-24A
(1) Enter the web page address in the address field of the web
browser as follows:
http:// [IP address of the GB-24A]/g-50/ administrator.html
Press the [Enter] key on the keyboard. A screen appears for login.
Note: For example, type “http://192.168.1.1/g-50/administrator.html” if the
GB-24A IP address is [192.168.1.1].
(2) To make connection easier for the next time, click the web
browser menu item [Favorites], click [Add to Favorites], then add
the address to the Favorites folder. Once this address is added to
the Favorites folder, it is not necessary to input the address of (1).
Simply select it from the Favorites folder and the GB-24A page will
appear.
(3) Enter the user name and the password in the login screen, and click the [Login] button. A screen will
appear in which various setting are made. Procedures for making proper settings on each screen will be
explained in the following pages.
The table below shows the default user names and passwords for maintenance users and managers, as
well as available functions.
User
Default
user name
Default
password
Available functions
Initial settings
Date and Time, Basic System, Groups, Interlocked
LOSSNAY, Blocks
Functions 1 E-Mail, Measurement
Maintenance
user
initial init
Functions 2
Set Temperature Range Limit, Night Mode
Schedule
manager administrator admin
Out of the functions listed above, the items to which access rights have been
given on the user settings screen are available. (Refer to Chapter 7 "User
Setting.")
Note: The user name and the manager’s password are the same as those of the manager of the Web for monitoring/operation.
Note: Maintenance users can make available to the administrator only the information necessary for normal operation (group
name setting etc.)
Note: It is recommended to change the user name and password, so users other than the manager are not permitted to change
the settings.