Mitsubishi Electronics GB-24A Air Conditioner User Manual


 
9
4-2-2 M-NET Setting
In "M-NET settings", set the GB-24A M-NET address, presence/absence of K-Control model, and range of
prohibited controllers.
(1) Enter the GB-24A M-NET address in the [M-NET Address] field. Normally, [0] should be entered.
(2) When K-Control air conditioners are connected, click [Used] in the [K-Control Units] field and enter the
M-NET address of K transmission converter in the [K Converter Address] field.
Note: K transmission converter cannot be used. Select “Not used” for the K-control Units setting in the M-NET Settings window.
(3) In the local control prohibit settings, select both subordinate system controllers and remote controllers, or
only remote controllers. Click [SC/RC] to prohibit operation from both subordinate system controllers and
remote controllers, and click [RC Only] to prohibit operation from only remote controllers.
Note: Normally, [SC/RC] should be selected.
4-2-3 Network Setting
It is assumed that the GB-24A will be used on a private network.
In “Network Settings”, set the GB-24A IP Address, Subnet Mask and Gateway address. If connecting to the
GB-24A via a permanent LAN, consult with the network administrator before setting these addresses.
[Simple IP address setting of GB-24A]
The IP address that is set on the dip switch (SW2) on GB-24A main body has the priority. (Settings are shown below.)
When activating the value that is set on the initial setting Web, set all the switches on SW2 to OFF.
When the number of GB-24A units is 15 or less, it is recommend to set the IP address using the dip switch (SW2) on
GB-24A main body.
Note: After changing the dip-switch settings, reset the power of GB-24A to activate the changes.
123456 LINK/ACT LAN POWER
SW1/2/3 EXT.I/O M-NET
1 2 3 4 IP Address
OFF OFF OFF OFF
IP address set by Initial Setting Web
Note: Default IP address "192.168.1.1".
(Factory setting)
OFF OFF OFF ON 192.168.1.1
OFF OFF ON OFF 192.168.1.2
OFF OFF ON ON 192.168.1.3
OFF ON OFF OFF 192.168.1.4
OFF ON OFF ON 192.168.1.5
OFF ON ON OFF 192.168.1.6
OFF ON ON ON 192.168.1.7
ON OFF OFF OFF 192.168.1.8
ON OFF OFF ON 192.168.1.9
ON OFF ON OFF 192.168.1.10
ON OFF ON ON 192.168.1.11
ON ON OFF OFF 192.168.1.12
ON ON OFF ON 192.168.1.13
ON ON ON OFF 192.168.1.14
ON ON ON ON 192.168.1.15
SW 2
1 2 3 4
ON
OFF