Filter
Top Products
13
(4) Selecting [ON/OFF/Prohibit/Permit (Pulse signal)] makes it possible to use pulse signals to run multiple
units, stop multiple units, prohibit local operation and permit local operation. In this mode, it is possible to
freely operate the remote control except during the pulse signal input.
Contact ON
Contact OFF
Contact ON
Contact OFF
Stop
StopRun
0.5 - 1.0 Seconds
Run
Stop
Contact ON
Contact OFF
Contact ON
Contact OFF
Permit
Permit
Prohibit
0.5 - 1.0 Seconds
Prohibit
Permit
Connection to G-50A (CN2)
DC12V
Run
Stop
Prohibit
Permit
：Pulse generator
1
2
3
4
5
6
7
8
9