Filter
Top Products
15
4-3 Group Setting
Display the page needed to register the group of air conditioners or general equipment to be connected to the
G-50A and to set the group name by clicking [Initial Settings]-[Groups]. On this page, you perform the basic
setting such as the GB-24A unit name, network setting and M-NET setting. Click [Set to GB-24A] to send
setting data to the GB-24A.
Note: If the user logs in as a manager, some of the operations may be prohibited.
Note: A contact on the genera interface device is regarded as one unit. The number of units that can be connected to GB-24A is
up to 24.
Note: Air-conditioners and general equipment cannot be in the same group.
Note: Remote controllers or system controllers cannot be connected to general equipment.
4-3-1 Setting the Group Name
(1) In the [Group Name for Web] field on the screen, register the group name to be displayed on the Web
screen, using a name consisting of no more than 20 characters.
Note: The following characters cannot be used in the group name: < > & " '
(2)
It is not necessary to set the Group name for LCD.
4-3-2 Registering air conditioner units in the group
(1) To register air-conditioners, clicking the [Air Conditioner and
General Equipment Registration] field next to each group in the
[Groups] screen will bring up the [Select Unit Addresses] screen.
Click on the numbers corresponding to the units to be registered.
All selected units will be shown with a yellow-green background.
To cancel the selection, click on them again. Deselected items will
be shown with a gray background.
Note: A maximum of 16 air conditioner units can be registered in one group.
Note: To change the registered units to air-conditioners in the group in which
general equipment is registered, disconnect the general equipment first.
(2) To change the icon, click the right or left arrow.
Group name for LCD o
f
the GB-24
A
Note:Setting not required
Group No.
Group numbers will be
displayed here.
Remote Controller
Registration
Register the remote
controllers to be connected
here. Click to bring up the
registration screen.
Air Conditioner and general
equipment
Registration
Register the air conditioner
and general equipment to be
connected here. Click to bring
up the registration screen.
System Controller
Registration
Register the system
controllers to be connected
here. Click to bring up the
registration screen.
Group name for web
The group names to be used on
the Web screen are entered
here.
Save Settings
Send setting data to GB-24A.
Refresh
Read setting data from
GB-24A.