Filter
Top Products
-43-
* P1 to P3 of a composite pattern composed of P1 to P3 and P4.
• : Change the display group.
• : Move the cursor to the pattern position.
• : Select P1 to P4 or ( - )
• : Complete the setting.
The cursor will move to the next setting position.
* Repeat assign the schedule pattern to each day (and each group)
Weekly schedule setting screen
Schedule parttern setting screen
Malfunction monitor screen
Current time setting screen
When the No.4 function select is set ON, P4 connot be set.
NOTE :
• : Move the cursor position.
• : Change the pages
or = page + 1
or = page - 1
• : Select the ON(PROHIBITION) time or OFF
(PERMISSION) time.
(Time is changed by 10 minutes unit.)
• : Complete the setting. The cursor moves to the next setting p
• : Press this switch, where all setting have been completed.
• : Reset all malfunctions
* Repeat set schedules.
P1 P4
+
* The clock count will start with the second reset to 0.
* Set the date day, month, year and time.
* Three types (P1-P3) of daily ON/OFF pattern and one type (P4) of prohibition/
permission pattern are available respectively, each of which can be set for each
group.
When there is no malfunction taking place,[NO ERROR] lights up instead of [ERROR CODE].
When operation of the G-50A is prohibited,reset operation is invalid.
NOTE :
/
/
• : Move the cursor position
• : Set the number or day
5
4
GROUP
SELECT
BACK
SCREEN
BACK
SCREEN
BACK
SCREEN
BACK
SCREEN
ENTER
ENTER
DEL.
RESET
5
CLOCK / PATTERN
8
ENTER
ENTER
5
CLOCK / PATTERN
8
5
8
The unit address
Error code
The unit address
where the malfunction occurred
where the malfunction was detected
22-09-2002 00:00SUN