Filter
Top Products
-9-
POWER
GND
12VDC
91
CN2
51
CN1RS232C
Ethernet
ABS
M-NET
BACK
6 ADDRESS SETTING
7 FUNCTION SETTING
8 IP ADDRESS SETTING
VER.
LAN changeover switch
Refer to section "5. Initial setting ( page 25 ) " for
explanation of the operation of these switches.
LCD contrast adjustment knob
Rear side
Operation
panel
The collective operation switch can be per-
formed in the user setting mode for any screen.
( Excluding menu screen )
If this switch is pressed during
the operation, a whole group stop
is performed.
Collective operation switch
LAN status lamp
Orange LED indicates action and green LED indicates link.
Service LAN connector
Refer to section "5. Initial setting " for an explanation of this connector.
DC power supply terminator
External input / output interface connecter
Refer to section "7. External input / out-
put function ( page 38 )" for the detail
of operation of these connectors.
RS-232C connector
LAN(Ethernet)connector
M-NET Transmission
line terminal
M-NET address setting
Displays, or sets, the controller
M-NET address.
Refer to section "5. Initial setting
(page 25)" for a detailed explan-
ation of operation.
Sets the function of the controll-
er.Refer to section "5. Initial set-
ting(page 25)" for a detailed ex-
planation of operation.
Sets the LAN IP address.
Refer to section "5. Initial setti-
ng(page 25)" for a detailed ex-
planation of operation.
Maintenance
that
a
ADDRESS SETTING
FUNCTION SELECTS
IP ADDRESS SETTING
IP ADDRESS :
MASK ADDRESS:
192.168.001.001
255.255.255.000
ON
12345678
OFF
M-NET ADDRESS: 000
Function select setting
IP address setting
LOSSNAY
16-04-2002
014 6602
12 : 45
(DETECT 014)
05-04-2002
2002
2002
2002
012 6607
09 : 12
(DETECT 012)
.
GROUP NO
NONE
INDICATE
INDICATE
1-1-2001
NONE
7 TEMP. UNIT ˚C / ˚F
6
3
2
5
4
8
7
NEXT
02