Filter
Top Products
-10-
4 . User operation
Used the following two screens when user operation is performed.
Operation monitor screen This screen displays ON/OFF and malfunction condition of unit.
Operation setting screen The unit operations can be performed by individual group or collective
G-50A normally displays this screen.
operation. These operation include the ON/OFF, operation mode, fan speed,
temperature setting, air direction, ventilation setting, timer operation
ON/OFF, local remote controller prohibition and filter sign reset are
performed by group or collectively. In addition, this screen can also displays
the room temperature of each group.
Press the switch and
Press the switch.
Press the switch.
The unit operation can be verified in
Refer to section "4-1 Operation
condition monitor".
Press the (back screen) switch.
Press the or switch
(Individual group
operation setting
screen)
Each unit operation
(Collective
operation
setting screen)
setting is performed.
Refer to section "4-2 Operation setting".
to set "COL. (COLLECTIVE)" or
"GROUP" on the blinking display
and press the switch.
a single glance.
Press the or switch to set
"MON. (MONITOR)" on the blinking
display and press the switch.
Press the switch and
select "1. OPERATION MONITOR"
select "2. OPERATION SETTING"
• The collective operation can be performed on any screen (except for the menu screen) in the user operation
<Shifting to the operation monitor screen and operation setting screen>
<Returning to the user operation menu screen>
mode
.......
........
1
2
BACK
SCREEN
BACK
SCREEN
ENTER
ENTER
ENTER