Filter
Top Products
20
5 Functions 1
5-1 Error mail reports/E-mail communication
Click on [Functions 1] – [E-Mail] in the menu to open the [E-mail] window and make necessary settings to
perform remote monitoring via mail, using error mail report or the maintenance tool.
Click [Save Settings] to send setting data to the AG-150A.
Note: The use of the error mail report function requires a separate license registration.
Confirm on the license registration screen (Ch8) that the license registration has been completed.
Note: If the user logs in as a building manager, the operations may be prohibited.
5-1-1 Entering the E-Mail Information for the AG-150A
Enter the E-mail information provided by either the ISP or the
LAN administrator.
Note: When sending E-mail via an ISP, a user contract with the ISP is
required.
Make necessary settings based on the functions that are to be used, using the table below as a reference.
Table 5-1 Items that Require Settings to Be Made (E-Mail Settings of AG-150A)
Error Mail Report Mail Communication
Functions
Items
No SMTP
Authentication
Uses SMTP
Authentication
No SMTP
Authentication
Uses SMTP
Authentication
Mail Address V V V V
User ID V V V
Password V V V
Interval of checking incoming
mails
V V
Save Settings
Send setting data to AG-150A.
Refresh
Read setting data from AG-150A.
E-Mail settings of AG-150A
The E-mail settings o
f
AG-150A are set here.
Mail Server Information
Set the mail server/DNS serve
r
information here.
Mail Communication
Setting
Set the address of the mail
recipients here.
Error Mail Settings
Set the error mail destination
here.