Filter
Top Products
10
4-2 Setting the Basic Information and External Input Functions
Display the page needed to perform the AG-150A basic setting by clicking [Initial Settings]-[Basic System] in
the setting menu pane. On this page, you perform the basic setting such as the AG-150A unit name, network
setting and M-NET setting. Click [Save Settings] to send setting data to the AG-150A. After the setting data are
sent to the AG-150A, a message will appear asking whether or not to restart the AG-150A. Click [OK] to restart
the AG-150A to put the changes into effect.
Note: If the user logs in as a building manager, the operations may be prohibited.
4-2-1 AG-150A Unit Setting
In Unit Setting, set the AG-150A name and unit ID.
(1) Enter the AG-150A unit name in the [Name] field. You may enter a maximum of 40 alphanumeric or symbol
characters. The name set here is used on the display screen of the software that controls multiple AG-150A
units and for the name of the sender in the body of error messages.
Note: The following characters cannot be used in the name: < > & " '
(2) Enter the AG-150A unit ID in the [Unit ID] field. You must enter 6 numeric characters. Use this setting when
you want to control multiple AG-150A units with unit IDs. The unit ID that is entered here will be used on the
display screen of the software that controls multiple AG-150A units and for the sender ID in the body of
error messages.
(3) When [Refresh] is clicked, the AG-150A production ID will appear in the [SERIAL No.] field and the
AG-150A software version will appear in the [Software Version] field.
Unit Setting
Set the AG-150A name and
unit ID.
Network Setting
Set the AG-150A IP address
and subnet mask.
M-NET Setting
Set the AG-150A M-NET
address, presence/absence of
K-Control units and range of
prohibited controllers.
External Input Setting
Set the AG-150A external
input setting.
Display Forma
t
Set the items related to the
screen display on the AG-150
A
or on the Web.
Save Settings
Send setting data to AG-150A.
Refresh
Read setting data from AG-150A.