Filter
Top Products
Revision Notes: Revision A (ECO #C02428) initial release.
Revision B (ECO #C03046) reflects changes made to the History,
Details, and Graphs screen shots (pgs. 15, 33 and 34).
Revision C (ECO #CO2918) reflects the addition of Tank Sensor Open
on page 50.
Revision D (ECO #C04062) reflects changes to the terminology in all
SYNC manuals and labels from module to heat exchanger (exception:
control module), edits made to the ceramic fiber material warning,
removal of the stabilitor from FIG. 2-2 (C04057) along with the addition
of the Low Water Flow Test Procedure (R02559).
Revision E (ECO #C04560) reflects the addition of Modbus to the
manual and a new heat exchanger cleaning procedure.
Revision F (ECO #C06388) reflects the correction of “Manual Reset
High Limit” instructions on page 15.
Revision G (ECO C07981) reflects the addition of the O-temp switch
(Table 3F) and edits made to the Inputs diagram on page 7.
Revision H (ECO C09659) reflects the update of information within
Section 3 “Troubleshooting” on page 43.
SYNC-SER Rev H
01/12