Filter
Top Products
4
EXAMPLE SYSTEM
✦ The example shows a typical DVS-2400 system.
✦ Any or all of the accessories shown can be used.
✦ A total of 24 sensors can be used with each
Console.
DESIGN THE INSTALLATION
1. Draw a fl oor plan for the installation.
2. Consider the security needs of the premises.
3. Determine which doors and windows are vulnerable
to intrusion.
4. Figure which interior areas an intruder might go to if
unlawful entrance is gained.
5. Indicate locations for door/window sensors, interior
motion detectors, keypads, glass break detectors
and external siren speakers.
6. Decide on a centralized location for the security
Console.
2. SECURITY SYSTEM FLOOR PLAN
CON
S
GARAGE
MS
S
MD
ES
S
S
MD
MS
S
S
CON - CONSOLE
S - DOOR/WINDOW SENSOR
WK - WIRELESS KEYPAD
MD - MOTION DETECTOR
ES - EXTERNAL SIREN
SD - SMOKE DETECTOR
CO - CARBON MONOXIDE DETECTOR
GB - GLASS BREAK SENSOR
MS - HARDWIRED MAGNETIC SWITCH
LIVING
DINING
KITCHEN
ENTRY
BED
BATH
DEN
GB
SD
GB
BED
NOTE: IN NEW CONSTRUCTION, NFPA 72 REQUIRES A
SMOKE DETECTOR LOCATED INSIDE EACH BEDROOM
AS WELL AS A SMOKE DETECTOR ON EACH LEVEL.
MS
WK
S
S
S
CO
Example Residential Security System Floor Plan