17
OFF MODE
✦ Use this mode to disarm the burglary portion of the
system.
✦ Switching to Off Mode stops any alarms in
progress.
✦ The 24-hour functions are still active in Off Mode
and can be triggered by pressing the FIRE or
EMERGENCY button.
1. Switch to Off Mode by entering the user code, and
pressing OFF.
✴ When the system is disarmed to Off Mode, the Console will
sound one “Gong”.
✴ If an alarm has occurred, multiple Beeps will sound after
disarming and the sensor indicator for the sensor(s) that
caused the alarm will fl ash.
✎ NOTE: In Off Mode, protected doors and windows
cannot trigger the burglary alarm.
CHIME MODE
✦ Chime Mode is for monitoring entries and exits
without causing alarms.
✦ Use Chime Mode as an “automatic door chime”
when at home.
✴ Opening any protected door or window causes the Console
to sound a “ding-dong”.
1A. Select the Chime Mode by entering a user code,
then press CHIME.
1B. The user can enter Chime Mode from Off Mode
by pressing CHIME for two seconds.
✴ When the system is switched to the Chime Mode, the
keypad(s) will sound a “Gong” and one “Beep”.
✦ Switching to Chime Mode disarms the system
and stops any alarms in progress.
✴ If an alarm has occurred, multiple Beeps will sound after
disarming and the sensor indicator for the sensor(s) that
caused the alarm will fl ash.
✎ NOTE: In Chime Mode, protected doors and
windows cannot trigger the burglary alarm.
9. CONSOLE OPERATING MODES
START HERE
YOUR
USER
CODE
DONE
1 GONG
(OPTIONAL)
OFF
OFF MODE
START IN OFF
DONE
1 GONG
& 1 BEEP
HOLD
DOWN
CHIME
START HERE
YOUR
USER
CODE
DONE
1 GONG
& 1 BEEP
(OPTIONAL)
CHIME MODE
CHIME