Filter
Top Products
Consumer Defined Control Features
Setting Temperature Display -- Fahrenheit or Celsius
The BROIL / and FLEX CLEAN @ pads control the Fahrenheit or Celsius temperature display modes. The oven
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit. Note: both ovens will be changed at the same time.
iNSTRUCTiONS PRESS DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. Press (_Broil_/and hold for 6 seconds. A beep will sound, "550"
will appear "UPPER" and "BROIL" will flash in the display
(Figure 1). After 6 seconds a beep will be heard and "F" (Figure
2) or "C" (Figure 3) will appear in the display.
If "F" appears, the display isset to show temperatures inFahrenheit
(Figure 2). If "C" appears, the display isset to show temperatures
in Celsius (Figure 3).
2. Press _ to switch between Fahrenheit or Celsius
display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
@
3. Press START_: to accept the change or press to reject the
change.
for 7seconds
Figure 1
Figure 2
or Q
Figure 3
12