Filter
Top Products
Consumer Defined Control
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These includethe
Oven Lockout, Temperature Display and Silent Control Operation features.
Setting Oven Lockout Feature
The _pad controls the Oven Lockout featu re.The Oven Lockout feature automatically locks the oven door and prevents the
oven
from being turned on. Itdoes not disable the clock, Kitchen Timer or the interioroven lights. The ovens can be locked individually.
INSTRUCTIONS
To activate the Oven Lockout feature
1. Press and hold _ for 3 seconds.
2. After 3 seconds a beep will sound, "DOOR", "LOCKED" will flash
and "Loc", "UPPER" and _ will appear inthe display (Figure 1).
Once the oven door is locked the "DOOR" and "LOCKED" indicator
will stop flashing and remain in the display. Allow 15 seconds for
the oven door to lock.
PRESS
for
3 seconds
DISPLAY
Figure I
To reactivate normal oven operation:
1. Press and hold _ for 3 seconds. A beep will sound. "UPPER" Qfor
"LOC" and _1 will disappear from the display. "DOOR" and 3seconds
"LOCKED" will flash in the display until the oven door has
completely unlocked.
2. The wall oven is again fully operational.
Note: Because you can set the oven lockout individually, the lower oven
can be used when the upper oven lockout feature is on.
iii.........
Setting Silent Control Operation
The DELAY START _ and FLEX CLEAN _ pads control the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS PRESS DISPLAY
To change control from normal sound operation to
silent control operation
1. Press and hold _ for 6 seconds. A beep will sound, '==.==will
appear, "UPPER" and "DELAY" will flash inthe display (Figure 2).
After 6 seconds, a beep will sound and "SP" (Speaker) will appear
in the display (Figure 3).
2. Press _ to switch between normal sound operation and silent
operation mode.
If "SP" appears (Figure 3), the control will operate with normal
sounds and beeps. If "=="appears (Figure 4), the control is in the
silent operation mode.
.............. Q
3. Press _TART"to accept the change or press to reject the
change.
Note: The control will always beep at the end of a kitchen timer and will
beep when a set temperatu re has been reach ed, even ifthe control is set
to silent operation.
Q
for 7 seconds
Q
Figure 2
Figure 3
or@
Figure 4
11