Kenmore 625.34847 Water System User Manual


 
Refer to the Installation Manual, part no. 7159931,
for' step-by-step guides.
To be sure you have done all the steps to install the
softener, read the following list. Page numbers
referred to are in the Installation Manual.
_' Is the house water supply flow going into
the softener valve INLET? Trace piping to be
sure, See pages 10 and 11,
_" Is the plumbing bypass valve (or 3 valves) set
for soft water servtce. See page 18,
_' Is the valve drain hose connected to the drain
fitting the right way? Does the drain hose run to
the drain point without sharp bends or kinks
that could stop or reduce water flow? See page
16
v" Is the softener' power cable connected to the
transformer, and is the transformer plugged
into an inside, 120V-60Hz electrical oudet?
See page 20.
_" Be sure to restart the water heater: See page 20.
SUppLy
"-,VALVE
iNLET
brass 3 valve Jt |_
Bypass (
Valves
plastic
_ Water
Heater
5