Filter
Top Products
SECTION 2 HOW YOUR WATER SOFTENER WORKS
I' i
2A. FACE PLATE TIMER FEATURES
,,,,,,,,, ......... _,,,,,,, ,, _................ ,_., .
EXTRA RECHARGE
Sometimes, a manually started regeneration (re-
charge) may be desired, or needed. Two exam-
ples are:
-- You have used more water than usual (guests
visiting) and you may run out of soft water before
the next timer started regeneration.
-- You did not refill the softener with salt before it
was gone
You can start a regeneration right away, or you can
set the timer to regenerate at the next 2:00 AM (or
other preset recharge time). Do the following
RECHARGE NOW
m Press the ON/OFF--HOLD button and hold
for3 .seconds RECHARGE 6D ]
NOW begins to flash in the 3: q_i
display, and the softener en- .ECUA.G_NOWJ
ters the fill cycle of regenera-
tion right away. This regeneration Will last for
about 2 hours Then, you will have soft water
again.
RECHARGETONIGHT
[] Press and release (do not hold) file ON!
OFF-HOLD button RE- ,_/., !_ 1i
CHARGE TONIGHT flashes J qt,= 1
in tile display, and the soften- ._C.A.G_TO.,CU*J
er begins regeneration at the
next preset recharge time If you decide to can-
cel the regeneration before it has started, press
and release the ON/OFF-HOI.D button once
more to turn off the flashing RECHARGE TO-
NIGHT
PROGRAM MEMORY
If electrical power to the softener goes off, the
time display is blank but the face plate timer keeps
the correct time for' about 6 hours. When electrical
power comes on again, you have to reset the
present time only if the display is flashing. The
HARDNESS and RECHARGE TIME never require
resetting unless a change is desired.
Even if the timer is incorrect after a long power
outage, the softener works as it should to keep
you water soft. However', regenerations may occur
at the wrong time of day until you reset the timer
to the correct time of day
ERROR CODE
An error code could appear in the face plate
display if a problem occurs in the softener
electronics° If you see an error code instead of the
time of day, please call you local Sears Service
Department for service ...........
iErr0
E
IF YOU NEED HELP ON THE USE OF THE TIMER FEATURES, CALL TOLL FREE,
NUMBER 1-800- 426-9345,
10