Kenmore 625.34847 Water System User Manual


 
SEOTRO 5 sE.vlcETEc..I.J=O.MA"nO.
t
50. WATER FLOW THROUGH THE SOFTENER VALVE
.,,,.,,,=,,,,=,,=, ,,,,,,,,,,,,,.,_,,,, , r"'_,,' ........ =, i ..............,......... ,_ ," "_"
BRINING AND BRINE RINSE CYCLES
VALVE
OUTLET
(BYPASS
WATER)
NOZZLE
e
BRINE
FROM SALT
STORAGE
TANK
ROTOR & DISC
VENTURI
\
DRAIN
INLET
(HARD WATER)
TOP
i I_ RESIN _
BED,.',:
-'-_ -- BOTTOM
Afte[ fill, time[/switch action allows the motor to turn the rotor and disc into BRINING
position. Water flow is directed to the nozzle Suction, created by the nozzle and venturi,
draws brine from the salt storage tank and injects it into the resin bed via the bottom
distributor'. Flow continues out the top distributor and to the drain. Hard water is available
at the valve oudet.
When the b['ine valve closes to end brine draw, water flow continues in the same
directions to slowly RINSE brine fi'om the resin bed and to the drain.
ROTOR &
OUTLET
RESIN
BED
BACKWASH CYCLE
FLOW PLUG
INLET
Timer/switch action again allows the motor to turn the
rotor'& disc to place the valve in BACKWASH, stopping
water flow to the nozzle. Water is routed down and out the
bottom distributor, up through the bed, and out the top
distributor to the drain. The fast flow (controlled by a flow
plug in the drain fitdng) flushes dirt, sediments, iron
deposits, remaining brine and hardness to the drain.
DISTRIBUTOR
.L RESIN
DISTRIBUTOR
25