Filter
Top Products
SEOTRON5 SE.vLcE'rEc..INFORMATION
I
I
50. WATER FLOW THROUGH THE SOFTENER VALVE
SERVICE CYCLE
INLET
WATER)
TOP
DISTRIBUTOR Posmo.
SWITCH
RESIN ,_
TANK
tL. RESIN
BED,
, 4j
KkBOTTOM
DISTRIBUTOR
Hard water' enters the valve inlet port. Internal valve porting routes the water down and
out the top distributor, into the resin tank. Hard water is softened as it passes through the
rosin bed, then enters the bottom distributor Soft water flows back into the valve and out
the valve outlet, to the house soft water pipes.
POSITION
SWITCH
VENTU_
Fill
(SOFT)
(SOFT WATER!
"....I'.gr
FILL CYCLE
VALVE CAM
ROTOR & DISC
-- VALVE INLET
]_(HARD WATER)
/X_ OSITION
SWtTCH
To begin a regeneration, the electronic timer energizes the circuit to the valve moto[: The
valve motor rotates the rotor and disc and the valve cam until the position switch lever
drops to open the motor circuit, when the valve reaches FILL position. As the rotor and disc
rotates, the port opens for SOFT water fill through the ventud. Fill flow continues to the
brine valve, and into the salt storage tank. Soft water is still available to the house lines
24