Filter
Top Products
44
1
2
1
5
4
3
1 2
3
4
1
5
4
3
2
Using Walking Foot
Thumb screw
Foot holder
Lever
Needle clamp
Presser bar
1
2
3
4
Turn off the switch
Raise the needle and presser foot.
Loosen the thumbscrew and remove the foot holder
(Refer to page 12)
Attach walking foot to the presser bar with the lever
above the needle clamp, and secure it with the thumb
screw.
NOTE:
Sew at low to medium speed.
Set the stitch length in the range of 0-4.
This is a special attachment for hard-to-feed materials.
This foot prevents fabric slipping or puckering by feeding
fabrics with both upper and lower feed dogs. The walking
foot is great for fine fabrics, knits, leather and matching
plaids.
1
5
4
3
2
Using 1/4ý Seam Foot
Stitch selector: 7
Stitch width: 6.5
Stitch length: Red zone
Needle thread tension: 3 to 5
Presser foot: 1/4ý seam foot
Using the black bar as a guide, straight stitch fabric pieces
together. Use for keeping layers of fabric feeding evenly.
This foot is a must for sewing lightweight fabrics, matching
plaids, stripes and quilting.
NOTES:
When using the 1/4ý seam foot, make sure to use the
center needle position, otherwise the needle may strike
the presser foot and possibly break.
Use a #11 blue stretch needle, which effectively prevents
skipped stitching.
5
3
4
1
4
2
5
3