Filter
Top Products
94
1
8
7
6
5
4
3
2
1
6
5
4
3
2
9
1
5
4
3
2
6
3
Needle thread
Bobbin thread
Buttonhole foot
Gear
Slot
Starting point
Attach the buttonhole foot . Adjust the position of the
gear , so it is aligned with the starting point of the
template . The lever can be used to change gear
positions. Pull the bobbin thread up through the guide slot
of the buttonhole guide plate by turning the handwheel
counterclockwise while holding the needle thread. Place
the bobbin and needle threads to the left side of the guide
plate. Leave 3" to 4" (7.0 to 10.0 cm) of thread.
Automatic Buttonhole (Continued)
Guide slot
Guide block
Buttonhole guide plate
Buttonhole template
Catch
Setting mark
Gear
Base plate
Lever
Select a buttonhole template . Pull back the guide plate
catch , and slide the template into the guide plate to
get the desired buttonhole. Release the catch to lock the
template into place. Insert the gear of the base plate into
the template guide slot so that the guide block fits into
the center of the guide slot.
1
5
4
3
2
6
7
8
9
4
5
3
7
1
2
4
6