Filter
Top Products
26
1
2
10
1/8
3/8
5/8
1
4
3
2
1
4
3
2
1
2
1
2
• Removing the hook cover plate
Hook cover plate release button
Hook cover plate
Slide the hook cover plate release button to the right,
and remove the cover plate .
4
3
2
4
Guide the thread into notch on the front side of
the bobbin holder. Draw the thread to the left, sliding it
between the tension spring blades.
Continue to draw the thread lightly until the thread slips
into notch . Pull out about 6" (15.0 cm) of thread.
Attach the hook cover plate. Check the threading by
referring to the diagram shown on the hook cover plate.
1
2
3
4
1
• Inserting the bobbin
End of thread
Notch
Notch
Threading diagram
Place a bobbin in the bobbin holder with the thread
running off counterclockwise.
3
2