Filter
Top Products
57
Customizing the Setting with the Sub Control Panel
Press the MODE button until the LCD screen shows
MB-4 OP blinking.
Press the ENTER button to start the My setting mode.
q MODE button
w Enter button
[01] Buzzer sound control
Press the right or left arrow button to adjust
loudness of the buzzer.
To mute the buzzer, set the value to [ 0].
Press the ENTER button to register the new setting
or press the upward arrow button to go to the
next setting.
[02] Eco mode setting
The sewing lights will turn off, and the LCD screen go
dark if you have not used the machine for a while.
Pressing any button will turn on the sewing lights and
screen.
The eco mode timer can be set from 1 to 30 minutes
by pressing the right or left arrow button .
Press the ENTER button to register the new setting
or press the upward arrow button to go to the
next setting.
[03] Machine ID number
When connecting two or three units of the MB-4 to
the PC at the same time, you need to assign the
identification number to each machine.
Press the right or left arrow button to select
the ID number.
Press the ENTER button to register the new setting
or press the upward arrow button to go to the
next setting.
NOTE:
Press the downward arrow button to go back to
the previous setting.
MB-4 OP
1 03
5 01
10 02
q
w