Filter
Top Products
26
001 ABC_001 M2
M1 00001 01/13 1
M1 00001 01/13 1
M1 00001 01/13 1
M1 00001 01/13 1
002 E_001 M2
Machine Settings
Press the MODE button to select the item you wish to
change the setting.
The selected item will blink.
Press the MODE button to select the next item or
press the ENTER button to change the setting of the
selected item.
q MODE button
w ENTER button
Stitch count setting
You can set the stitch count to where you wish to start
sewing.
Press the MODE button to select the stitch count
setting and press the ENTER button.
Press the upward or downward arrow buttons to
change the stitch count value.
Press the ENTER button to register the new setting.
Color section (layer) setting
You can change the color section to where you wish to
start sewing.
Press the MODE button to select the color section
setting and press the ENTER button.
Press the upward or downward arrow buttons to
select the desired section.
Press the ENTER button to register the new setting.
Needle bar number setting
You can select the needle bar to where you would like
to begin sewing.
Press the MODE button to select the needle bar
number setting and press the ENTER button.
Press the upward or downward arrow buttons to
select the desired needle bar.
Press the ENTER button to register the new setting.
Selecting the Embroidery Pattern
You need to save the data file of the embroidery
pattern in the internal memory of the machine by
using Digitizer MB for multi-needle or the RCS unit
(optional items).
Press the MODE button to select the pattern selection
mode and press the ENTER button.
Press the upward or downward arrow buttons to
select the desired data file.
Press the ENTER button to confirm your selection.
q
w