Filter
Top Products
T7350 Commercial Programmable Thermostat
15 63-2605—06
Table 11. T7350 Key Function Summary.
a
Fan On: Continuous fan operation during occupied periods. During not occupied and standby periods, fan cycles with call for heat
or cool.
Fan Auto: Fan cycles with call for heat or cool during all periods. (See Fan Settings section for more details.)
NOTE: The display returns to the default screen after pressing Run Schedule (or after a period of time without keypress):
— ten seconds: when returning from temporary setpoint changes, info screen, temp occ, and temp not occ.
— one minute: when returning from setting clock/day.
— ten minutes: when returning from System Checkout.
— five minutes: when returning from all other modes.
Grouping Button Definition
Information Down Arrow Lowers setpoint, day, or time. When setting times or temperatures, hold key down to
continuously decrease value. Also can make temporary change in temperature setpoint.
Information Obtains information (where humidity “high-limit” can be set), cycles through setup options.
Up Arrow Raises setpoint, day, or time. When setting times or temperatures, hold key down to
continuously increase value. Also can make temporary change in temperature setpoint.
Temperature Occupied
Heat
Sets Occupied Heat setpoint.
Occupied
Cool
Sets Occupied Cool setpoint.
Not
Occupied
Heat
Sets Not Occupied Heat setpoint.
Not
Occupied
Cool
Sets Not Occupied Cool setpoint.
Set Day Sets day of week. Tapping key with 'Set Value' segment on increases current day (same
effect as Up Arrow key).
Time Sets time.
Tapping key with “Set Value” segment on increases time in one hour increments.
Override Temporary
Occupied
Temporary occupied setting for length of time defined by installer.
User can modify setpoints.
Temporary Not
Occupied
Sets holiday length.
User selects number of days (“0”-”99”), or “---” for continuous override.
Schedule Day Selects day schedule to modify. (Used also with copy key.)
Occupied Selects occupied event start times for specified day.
Repeatedly press this key to toggle between two occupied events.
Not Occupied Selects not occupied event start times for specified day.
Repeatedly press this key to toggle between two not occupied events.
Clear
Start Time
Clears start time for specified period and day.
Copy Copies schedule from one day to another.
System Selects System Mode. Toggles through Em Heat, Heat, Off, Cool, and Auto modes.
Fan
Selects fan operation mode. Toggles between On and Auto.
a
Run Schedule Resumes running schedule.
Cancels Temporary (Not) Occupied action, and/or Temporary setpoint changes.