Filter
Top Products
T7300F/Q7300H SERIES 2000 COMMERCIAL THERMOSTATS AND COMMUNICATING SUBBASES
63-4365 6
Applicable Literature
The following list of documents contains general
information related to the T7300F/Q7300H Series 2000
Commercial Thermostats and Communicating Subbases.
Form No. Title
62-0125 T7300F Series 2000 Commercial
Microelectronic Conventional or Heat
Pump Thermostat Installation Instructions
62-0155 Q7300H Series 2000 Commercial
Thermostat Installation Instructions
74-2976 Excel LonSpec™ Specification Data
74-2977 Excel LonSpec™ Software Release
Bulletin
74-2937 Excel LonSpec™ User’s Guide
74-2982 Li
g
ht Commercial Buildin
g
Solutions
System Specification Data
74-2865 E-Bus Wiring Guidelines User’s Guide
74-2967 Excel 15 W7760A Buildin
g
Mana
g
er
Specification Data
95-7565 Excel 15 W7760A Buildin
g
Mana
g
er
Installation Instructions
74-2969 Excel 15 W7760A Buildin
g
Mana
g
er
System Engineering
74-2956 Excel 10 W7750A,B CVAHU Controller
Specification Data
95-7521 Excel 10 W7750A,B CVAHU Controller
Installation Instructions
74-2958 Excel 10 W7750A,B CVAHU Controller
System Engineering
74-2698 Excel 10 W7761A RIO Controller
Specification Data
95-7539 Excel 10 W7761A RIO Controller
Installation Instructions
74-2699 Excel 10 W7761A RIO Controller System
Engineering
74-2697 T7770A, B, C, D, E, F, G Wall Module
Specification Data
95-7538 T7770A, B, C, D, E, F, G Wall Module
Installation Instructions
95-7554 209541B Termination Module Installation
Instructions
Agency Listings
European Community Mark (CE): Conforms to
requirements of European Consortium Standards.
ABBREVIATIONS AND DEFINITIONS
Application
—A specific Building Control function.
Binding
—The process of logically connecting network
variables in one node to network variable(s) in other
node(s). Binding is performed by a network management
node that writes the binding information into the EEPROM
memory of all the neuron's involved. The binding
information is saved in the network image of each neuron.
Building Manager
—A LonMark® certified device that can
be used to monitor and control HVAC equipment and other
miscellaneous loads in a distributed network.
Command Display
—A device that can be used to monitor
and change parameters.
Control Loop
—A primitive control function. A type of
function in a node that includes processes, loops and
programs. A node can contain one or more control loops.
(In Excel 10 class devices, the control loop occupies the
entire node.)
CVAHU
—Excel 10 Constant Volume Air Handler Unit
Controller.
Excel 10s
—A family of application - specific HVAC
controllers such as the Excel 10 CVAHU and Excel 10
RIO.
HVAC
—Heating, Ventilating and Air Conditioning.
I/O
—Input/Output.
LonWorks® Network
—A data network based on neurons
communicating with each other using the LonTalk®
protocol.
Mandatory Mechanisms/Objects/Network Variables
—
Mandatory mechanisms and network variables that are
implemented in all the Excel 10 devices.
NamedObject
—Objects that have names are called
NamedObjects. These objects are visible on the network
as functional independent entities and are accessed by
name. Typical examples of NamedObjects are Controllers,
ControlLoops and LogicFunction blocks.
Network Management Node
—A LonWorks® node that is
responsible for configuring the network, installing the
nodes, binding the network variables between nodes, and
general network diagnostics.