Filter
Top Products
3FIRSTVISION™ Installation and Operation Manual - P/N: 53034:Rev: A2 10/29/07
Section 1 Introduction
The contents of this manual are important and must be kept in close proximity to the hardware. If
building ownership is changed, this manual and all other testing and maintenance information must
also be passed to the current owner of the facility. A copy of this manual was shipped with the
equipment and is also available from the manufacturer.
1.1 FIRSTVISION Specifications
!
WARNING: Improper Installation
Improper installation, maintenance, or lack of routine testing could result in system malfunction.
!
CAUTION: Servicing FIRSTVISION
This product can only be serviced by authorized personnel. Only authorized personnel can remove
this product’s CPU back-cover or replace parts in this product. Unauthorized servicing personnel
performing product services is strictly prohibited and can void your warranty
NOTE: ONYX®FIRSTVISION™ is for Ancillary Use Only.
Table 1.1 FIRSTVISION Cabinet Specifications
Part Number FIRSTVISION-ENC
General:
Rough Opening Dimensions 18" W x 17.75" H x 3.5” D
Material Aluminum
Finish Black epoxy powder coat finish, fine texture
Mounting Panel
Enclosure:
Door Dimensions 20" W x 18.5" H x 0.4" D
Material 0.060 Galvaneal
Door Finish Black epoxy powder coat finish, fine texture – Door only
Door Plex shield 0.125 scratch resistant acrylic
Conduit punch outs (2) ½" and (2) ¾" on the top and bottom of the enclosure (8) total
Mounting (6) mounting holes for screw mtg. #10/12
Lock CFE – NOTIFIER® Standard Lock
Magnetic Latch Power Off/Command Latch release