Filter
Top Products
Enabling FIRSTVISION to Monitor Your Building Establish Communication Between Your LAN and FIRSTVISION
22 FIRSTVISION™ Installation and Operation Manual - P/N: 53034:Rev: A2 10/29/07
3.5 Establish Communication Between Your LAN and
F
IRSTVISION
The following steps are performed using Windows operations on FIRSTVISION.
Step 1. If F
IRSTVISION application is running, shut it down (ESC key on direct connect keyboard).
Step 2. Click Start >Control Panel. The Control Panel window displays.
Step 3. Double click on Network Connections. The Network Connections window displays.
Figure 3.10 Windows LAN Connection
Step 4. Right click on Local Area Connections 2 in the Network Connections window and select
Properties from the list of choices. The Local Area Connection Properties window
displays.
Step 5. On the General tab click on "Internet Protocol (TCP/IP)", then click on the Properties
button. The Internet Protocol (TCP/IP) Properties window displays.
Figure 3.11 Windows LAN Connection Properties
NOTE: A factory default IP address setting is set to: 192.168.0.4. If you need to change those
settings, then use the following information.