Filter
Top Products
Operation After a Fire Alarm Has Been Cleared Operating Basics of FIRSTVISION
37FIRSTVISION™ Installation and Operation Manual - P/N: 53034:Rev: A2 10/29/07
With the front door open; touching the Event List button will display a listing of the current alarms.
Figure 4.9 F
IRSTVISION Display Example: Event List
4.4 Operation After a Fire Alarm Has Been Cleared
If fire alarm was the only event being reported; then after a fire alarm has been cleared from the
panel that F
IRSTVISION monitors; the following takes place on FIRSTVISION:
• The fire alarm is cleared from the Event List.
• Any flashing fire alarm related device icons will no longer be displayed.
• If a screen saver is being used; the screen saver will automatically start when the screen saver’s
Wait setting is reached.
•F
IRSTVISION returns to normal monitoring operation.
3:41:05 PM
NOTE: Remember to go to FIRSTVISION after a fire alarm has been cleared from the monitored
network because FIRSTVISION’s door will need to be latched closed.