Filter
Top Products
16
Item
no.
Function Switch Operating procedure
㸯㸴
Manual adjustment
࣭Select adjustment items with the manual
control section switches. The display
section shows the adjustment item and
value.
࣭Use the rotary encoder to adjust the items
for optimum values.
Adjustment
&7/9$/8(
࣭When the&7/9$/8( switch is on, the
value display
adjustment value is displayed from -100 to
+100.
࠙Display exampleࠚ
Detail Adjustment
࠙Displayࠚ
(1)DTL LEVEL
'7/
TOTL: Total detail level adjustment
H: H detail level adjustment
V: V detail level adjustment
(2)LEVEL DEP /
'7/
࣭Press again the switch for the following
BOOST FREQ
display.
LDPP: Dark component noise due to detail
reduce.
FREQ: Adjusts detail boost frequency (13 M
to 19 M).
(3)CRISP /
'7/
࣭Press Again the switch for the following
DTL SOURCE
display.
H-CR: Noise component reduction due to H.
detail.
V-CR: Noise component reduction due to V.
detail.
SRC: Detail signal source (R,RG,RGB)
selection.
/(9(/'(3)5(4
/'33)5(4
*$,1
'(7$,//(9(/
727/+9
&5,636285&(
+&59&565&