Filter
Top Products
14
Item
no.
Function Switch Operating procedure
㸯㸯
Scene file
6&(1(),/( ࣭Scene file adjustment values can be stored
memory
in memory by the following procedure.
(1) Press the 0(025<switch.
(2) The 0(025<LED begins blinking.
(3) Press the scene file ( – or
) for storing data in the memory.
0(025<
(4) The selected scene file LED flashes and
the 0(025<LED lights for about 3
seconds. This completes storing memory.
The adjustment data of paint gain and
black can not be stored in memory,
To stop memory operation,
while the 0(025<LED is blinking,
press again the0(025<switch
㸯㸰
Shutter control
6+877(5
࣭Press 6(/to toggle the shutter display
212))
on/off and select the shutter speed and
6(/
mode.
Insequence,1/100(*1),1/250,1/500,1/1000,
1/2000 seconds, variable, AES,CCFR
&&)5(*2) Ѝ(*1) ЍЍ
ЌЎ
$(6(*3) ЋЋЋ
Variable mode
1/59 to 1/1983 (1080i/60)
1/50 to 1/2008 (1080i/50)
(*1) 1/60 ,when 1080i/50 CCD is used.
(*2) CCFR: cc frame mode
(*3) AES:auto electric shutter mode
࣭For variable mode, after selecting the
manual control section 6+877(5switch,
㸯㸱 㻹㼍㼟㼠㼑㼞㻌㼓㼍㼕㼚㻌 0$67(5*$,1
࣭ Master gain can be selected in 3 dB
steps.
㼟㼑㼘㼑㼏㼠㼕㼛㼚
㸺㸼
(-3dB~24dB)
䞉Selected master gain position is indicated
by the LED on left of this switch.