Filter
Top Products
44
Error message Procedure
AUTO WHITE：NG
CHANGE TO CAM
TRY AGAIN
・ Turn off the color bar.
AUTO WHITE：NG
CHANGE TO MEMORY MODE
TRY AGAIN
・ Set up WHITE BAL:MEM.
AUTO WHITE：NG
LOW LIGHT
TRY AGAIN
・ White balance cannot be made due to insufficient illumination.
・ Increase the intensity of illumination, turn lens iris toward open
direction, or increase the gain to provide a proper video level.
・ Press the AWB switch again.
AUTO WHITE：NG
HIGH LIGHT
TRY AGAIN
・ White balance cannot be made due to excess illumination.
・ Increase the intensity of illumination, turn lens iris toward closed
direction, or increase the gain to provide a proper video level.
・ Press the AWB switch again.
AUTO WHITE：NG
C.TEMP HIGH
TRY AGAIN
・ The color temperature is too high, making it impossible to reach the
optimum value in adjustment. (If there is no problem in practical
application, use the camera under the current condition.)
・ Add a filter to the lens or illumination to decrease the color temperature.
AUTO WHITE：NG
C.TEMP LOW
TRY AGAIN
・ The color temperature is too low, making it impossible to reach the
optimum value. (If there is no problem in practical application, use the
camera under the current condition.)
・ Add a filter to the lens or illumination to increase the color temperature.
AUTO WHITE：NG
LONG SHUTTER MODE
CHANGE SHUTTER MODE
TRY AGAIN
・Release the long shutter mode.
CAM MODE：AUTO
CHANGE TO MANUAL
・Set camera mode to manual.