Filter
Top Products
01-03 17 33606 Rev D
BUILDER'S CHOICE SERIES INSTALLATION INSTRUCTIONS
I. FINISHING
1. COMBUSTIBLE FINISHING MATERIAL
Materials made of or surfaced with wood, compressed
paper, plant fibers, plastics, or any material capable of
igniting and burning, whether flame proofed or not,
plastered or unplastered (this includes drywall) are
considered to be combustible.
2. NONCOMBUSTIBLE FINISHING MATE-
RIAL
Material which will not ignite and burn. Such materials
are those consisting entirely of steel, iron, brick, tile,
concrete, slate, glass or plasters, or combination
thereof, or have a UL Fire rating of Zero (0).
3. HIGH TEMPERATURE SEALANT MATE-
RIAL
Sealants that will withstand high temperatures: General
Electric RTV103 (Black) or equivalent; Rutland, Inc.
Appliance Mortar #63 or equivalent.
A high temperature sealant, 1/8 wide minimum, must
be used to close off gaps between the appliance and
facing to prevent cold air leaks. See Figure 28.
Figure 28
Finishing Materials
4. ATTACHING THE HOOD
The hood must be attached or a fire hazard may result.
Simply slide the hood under the three screws above
the appliance opening. See Figure 29.
5. GLASS AND SCREEN REMOVAL
See page 22 of this manual.
Figure 29
Hood Placement
WARNING!
Grilles and hoods on this appliance cannot, in any
way, be covered as it may create a fire hazard.