Heat & Glo LifeStyle SUPREME-P-I30AU Electric Heater User Manual


  Open as PDF
of 60
 
Heat & Glo • Supreme-N-I30AU, Supreme-P-I30AU • 2222-900 Rev. P • 6/1230
11-7/8 in.
(600 mm)
MAXIMUM
SLP 90° BEND
LINK ADAPTER
225 & 275 Ø
GALVANIZED FLUE
STARTER PLATE
FLEXIBLE FLUE
MIN. 35-7/16 ft.
(900 mm)
10 ft. (3 m)
MINIMUM
SLP-TRAP
Figure8.13OptionalSLPventingconguration-HorizontalTermination
Note: The header can only be installed in an existing masonry
chase or equivalent non-combustible enclosure. Clearances
around and above pipe must be adhered to.
Note: Adhere to AS5601 plumbers code for minimum clearances
for termination of balanced ue appliances.
Mustadheretopipeclearances.
Colinear to Coaxial Adapter
NOTE:Any3in.(76mm)section
ofexpipemustbeenclosedto
existingreplaceueindouble
lined flue to comply with
AS2918-2001andthebuilding
codeofAustralia.
Sealconnectionpointsforducting.
Sealantmusthaveaminimumex-
plosureratingof649°C(1200°F).
NOTE: Tape all SLP pipe connec-
tionswithaluminumfoiltaperated
toaminimumof149°C(300°F).
 previous next