Filter
Top Products
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev. U • 1/1256
STEP 1: Carefully remove the logs from the packaging.
CAUTION: Logs are fragile!
2016-925B 6/03
STEP 2: LOG #1 (SRV2016-701): Place notches of log #1
on outer two grate tines, and push against back of fi rebox.
Log Set Assembly: LOGS-2016
Model: QV36B-A
SAME
SAME
LOG
LOG
4
5
1
2
3
1
2
3
STEP 3: LOG #2 (SRV2014-703): Place log #2 with the
left tip of the log on the fl at spot on the burner. Pull the right
part of the log to touch right grate tine, and the top of the log
should rest against log #1.
STEP 4: LOG #3 (SRV2014-703): (This log is the same as
log #2). Place log #3 with the fl at side down and burned side
into notch on burner. Pull left end forward against grate.
STEP 5: LOG #4 (SRV780-707): Place log #4 across log #1
and log #2 with burned out area facing out.
4
STEP 6: LOG #5 (SRV700-706): Place log #5 across logs
#1 and #3 with the Y-shape facing out.
5
3
1
2
1
Install the Log Assembly
If the gas logs have been factory installed they should not
need to be positioned. If the logs have been packaged
separately, refer to the following instructions.