Page 60
Heat & Glo • NorthStar EPA Fireplace • 480-1081C
September 1, 2008
September 1, 2008
September 1, 2008
C. Firebrick Replacement
Thereboxofyourreplaceislinedwithhighquality
rebrick,whichhasexceptionalinsulatingproperties.
Thereisnoneedtouseagrate;simplybuildareon
thereboxoor.Donotoperatethereplacewithout
rebrick.
IMPORTANT: The bricks are very similar in size. Be
certain you have the proper brick in the correct location.
Measurethebricksizeforaccuracy.
After the coals are completely cooled, remove all old
brick and ash from unit and vacuum out rebox.
1. Remove new brick set from box and lay out to
diagram as shown in Figure 58.1.
2. Lay bottom bricks in unit.
3. Install rear bricks on the top of the bottom bricks.
Slidetopofbricksundercliponbackofrebox
wall and push bottom of brick back.
4. Install side bricks. Slide top of brick under clips
onsideofreboxandpushthebottomofthe
brickuntilitisushwiththesideoftheunit.
Figure 60.1 Brick Pattern
3
2
3
3
3
3
3
3
3
2
1
4
1
1 1
1
4
Use Part SRV7000-306 when ordering individual brick.
Provide brick dimension or copy this page, mark the
desired brick and take it to your authorized dealer.
Figure 60.2 Brick Pattern
3
3
3
3
3
3
1
1
1
1
1
3
3
4 4
2
2
# Brick Size Qty. In Set
1 13-1/4”x4-1/2”x1-1/4” 5
2 13-1/2”x4-1/2”x1-1/4”w/1-1/2”chamfer 2
3 12”x4-1/2”x1-1/4” 8
4 12-1/2”x4-1/2”x1-1/4” 2