Filter
Top Products
Heatilator • Novus NDV Series • 4055-187 Rev F • 06/0858
Latches
(both bottom
and top)
Glass
Assembly
Figure 14.11 Glass Assembly
M. Install Floor Cover
Install the fl oor cover as shown in Figure 14.10.
N. Fixed Glass Assembly
Removing Fixed Glass Assembly
WARNING! Risk of Asphyxiation! Handle fi xed glass
assembly with care. Inspect the gasket to ensure it is
undamaged and inspect the glass for cracks, chips or
scratches.
DO NOT:
• Strike, slam or scratch glass
• Operate fi replace with glass removed, cracked,
broken or scratched.
Replace fi xed glass assembly as a complete assembly.
• Remove screen.
• Pull the four (30/33/36 in. appliances) or seven (42 in.
appliance) glass assembly latches out of the groove on
the glass frame. Refer to Figure 14.11.
• Remove the glass assembly from the appliance.
Replacing Fixed Glass Assembly
• Set the glass panel on the lower two or four glass
assembly latches, ensuring the glass panel is centered
in the opening.
• Replace screen.
O. Close the Screen Assembly
Rotate the screen closed. See Figures 14.12 and 14.13.
Figure 14.10 Installing Floor Cover
Figure 14.12 Closing Screen
Figure 14.13 Closing Screen
Note: The fl oor cover in the bottom front of the fi replace may
be covering the UL labels.
It is loose and can be removed/
replaced.