Heatilator • Novus NDV Series • 4055-187 Rev F • 06/08 55
14
14
Appliance Setup
A. Remove the Packaging
Remove the shrink fi lm, corrugated top cap, bottom cap
and column protectors from the appliance. The appliance
should look as shown in Figure 14.1.
B. Open Front Screen Assembly
• Open the fl ap in the upper left hand corner of the screen
protector (Figure 14.2)
• Pick up on the screen to release the screen from the
shoulder screws in the fi replace columns. See Figure
14.3.
• Rotate the screen open as shown in Figure 14.4.
C. Remove the Shipping Materials
Remove the shipping materials from inside or underneath
the fi rebox.
D. Remove Fixed Glass Assembly
See Section 14.K.
E. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated
inside the fi rebox or underneath in the control cavity.
Figure 14.1 Appliance Unwrapped
Figure 14.2 Open Access Flap
F. Accessories
Install approved accessories per instructions included with
the accessories. Refer to Section 16.
WARNING! Rick of Fire and Electric Shock! Use ONLY
Hearth & Home Technologies-approved optional acces-
sories with this appliance. Using non-listed accessories
could result in a safety hazad and will void the warranty.
Figure 14.3 Lift up on Screen
Figure 14.4 Rotate Screen Open