Filter
Top Products
24
PF100
1. Turn Mode Selector to "OFF".
This resets the control in addition to turning it off.
2. Fill hopper with pellets.
When filling the hopper check for excessive fines in
the bottom of the hopper. Fines are small pieces of broken
pellets (sawdust). Fines do not flow easily and often build
up on the hopper funnel bottom angles. These fines can
be pushed into the feeder opening and then fill the hopper
with pellets. As the system works, they will be burned.
Starting A Fire Automatically
Fig. 46
Fig. 47
Fig. 48
3. Clean burnpot with scraper, if necessary.
This is usually a weekly maintenance procedure.
Cleaning the burn pot with the scraper with a small amount
of new fuel in the bottom is not a problem. First, scrape
the ashes on the front of the burn pot into the ash pan.
Then scrape the hole grid surface downward into the
burn pot. When the stove is ignited these scrapings will
be pushed out by the feeder.
Note: If the Distribution Blower is running when
the outer door is open, some air will escape around the
door opening. This is not a problem, however, any dust
that is caused in the process can potentially be blown
around.
Operation